Roller Shutter Window Blinds - Vertical window blinds are a terrific pick for specific rooms in your house, including the bedroom, living area and kitchen, as they provide excellent flexibility and control with the pleasing aesthetic design. Here we talk about the best way to measure for and install vertical blinds in your house. Vertical dividers will either operate from the surface of your window down to the bottom of the window or so much as the floor. The window blinds can be installed on the interior of the window frame or about the outside of the window frame, based upon the window style. The latter would put the blinds onto the top of the window but on the outer edge of the timber.
When measuring for your blinds you need to measure from where you want to put in them. If you're putting up the dividers on the interior of the window frame, you will measure on the interior of the window and if you're putting up the drapes on the outside of the frame, you'll have to measure from that point. If your window is 60" wide and 40" long - or tall should you want - then if you're putting the blinds up on the interior of the casing you probably are going to desire 58 or 59" across and 39" long. If, however, you have opted to put the vertical blinds onto the outside of the frame over the window you are going to need wider and longer dividers, probably about 62" or 64" wide, and will measure approximately 44" long.
You'll need to decide whether or not you need to see that the window frame and whether or not you want the blinds to attain the bottom of the window, then the frame or right to the floor and fix accordingly. Some people prefer to pay just the window area of their window using the blind and this can be OK if you're measuring the inside or the exterior areas of the window frame. If you want to have the vertical blinds placed on the interior of the frame though, it will be impossible to get your window blinds longer than the window as they will end up sticking out and looking absurd.
Check to see if anything will get in the way of your blinds once they are hanging. When it is, look at reducing the length of your window blinds or rearranging your furniture to allow for the length you want. Now you have your measurements, draw them out on a bit of paper to make doubly sure they're just as you need them. If you're happy you're all set to go ahead and have your dividers made.
It's rare that you'll be able to come across vertical dividers of the width and length that you take a ready-made, so you'll need to find a window blind company to make them for you. The will also very probably set up the dividers for you, saving that trouble. Should youn't need to go to this expense, however, it is absolutely possible for you to adjust blinds and install them yourself, though you ought to read up on how to do so first!